Alternative Design Ferret Isolator
Item#: VENTILATED FERRET RACKAlternative Design Ferret Isolator is a HEPA-filtered, individually ventilated caging system designed to provide controlled isolation and containment for ferrets in research environments. The rack can operate in either positive or negative pressure modes, with each cage individually ventilated to support controlled housing conditions. Each enclosure features polypropylene flooring, a squeeze bar, and a custom J-feeder designed to accommodate ferret food and a 32 oz. water bottle, while front and top access simplify animal handling and routine husbandry. Stainless steel rack construction supports demanding vivarium environments, while open rack sides and cage fronts maximize animal visibility and 20 x 24 x 18-inch interior cage dimensions provide dedicated housing space.
IMPORTANT: INITIAL CLEANING
All components of this Alternative Design stainless steel product must be cleaned, sanitized and sterilized, where applicable, prior to being put into service. This unit is made primarily of 304 stainless steel. Use care when cleaning to prevent corrosion that can shorten useful life. Cleaning solutions which contain high levels of chlorine are not recommended for stainless steel parts.
Caster Maintenance
Caster used on this equipment was chosen for its suitability in applications where frequent washdowns are necessary. It is also well suited for applications exposed to heat, cleaning agents, steam, caustic solutions or other corrosive agents, which could cause rust and contamination. After washing and/or autoclaving, check casters for proper operation. Check the axle nut to ensure it is still
tight (125 inch/pound is recommended). If the axle and/or swivel bearing has to be lubricated, use a high temp grease
- HEPA filtered enclosure rack with the ability to run in either positive and negative mode
- Each cage to be individually ventilated
- Polypropylene flooring in ea. cage
- Custom J feeder designed to hold ferret food and a 32 oz. water bottle. Both mounted inside cage. Feeder is inside the rack enclosure and outside of the cage
- Squeeze bar
- Rack sides and the front of the individual cages are designed to provide maximum visibility.
- Cage is accessible from both the front and top.
- One handle on the front of each cage.
- Interior Cage Dimensions 20″ x 24″ x 18″
The 5-year warranty includes:
* Individually Ventilated Caging (IVC) rack frames and fabricated components
* All other stainless steel fabricated caging systems
* Fabricated material handling, storage and processing equipment made of stainless steel
Request a Proposal
Related Products
- Item #: AIU-45X30X85
- Item #: AIU-01-PN-E
- Item #: 112-4323
- Item #: NU-608
- Item #: NU-610
- Item #: NU-640
- Item #: NU-677
- Item #: NU-620
