Labconco Protector Echo Floor-Mounted Filtered Fume Hoods

Labconco Protector Echo Floor-Mounted Filtered Fume Hoods

Item#: LABCONO-ECHOFM

Protector Echo Filtered Floor-Mounted fume hoods from Labconco provide the interior height needed for bulky apparatus with no ducting required. These hoods feature fully-closing, vertical-rising sashes. eGuard® communication software offers real-time monitoring on the user’s phone or computer. From a remote location, data such as usage authorization, filter saturation detection, sash position and temperature may be observed and managed.

The Echo uses Neutrodine® Unisorb Filters, the most comprehensive, safety-driven carbon filter available. This single molecular filter type can easily adsorb most chemicals and mixtures, taking the guesswork out of filter selection. Erlab-proven Neutrodine Filters are the heart of GFH Filtration Technology. Floor-Mounted models include a fiberglass panelized liner and three exterior depths: 37.7”, 43.7”, and 55.7”. Models are available for carbon-only, carbon with acid sensor, carbon with formaldehyde sensor, or HEPA-only filtration. Filters are sold separately.

To determine if your application is right for a Protector Echo Floor-Mounted Hood, please request a Chemical Assessment from a LabRepCo specialist who can recommend the appropriate enclosure and filters for your application. Floor-mounted fume hoods are shipped partially unassembled and require some field assembly (not provided by Labconco). They are shipped on 2-3 pallets, requiring placement of lower and upper portions, installation of corner posts, baffles, header, and sashes, and connection of piping and electrical (if included). Detailed instructions are available upon request.

*Filters required

Request a Quote

Supplier: Labconco

Models width’s available:
- 4 ft Width
- 5 ft Width
- 6 ft Width:
- 8 ft Width:
Model depth’s available:
- Exterior Depth:
  - 7”
    - Interior Depth:
      - Lower: 28.7”
      - Upper: 29.7”
    - 7”
      - Interior Depth:
        
        Lower: 34.7”
        
        Upper: 35.7”
      - 7”
        
        Interior Depth:
        
        Lower: 46.7”
        
        Upper: 47.7”
Sensor Packages available:
- Solvent sensor
- Solvent sensor + acid sensor
- Solvent sensor + formaldehyde sensor
- HEPA Filter only
Electrical configurations available:
- 115V, 50/60 Hz, with 10A plug for North America, No service fixtures
- 115V, 50/60 Hz, with 10A plug for North America, Two service fixtures
- 115V, 50/60 Hz, with 10A plug for North America, Two service fixtures and GFCI Duplex*
- 230V, 50/60 Hz, with 5A plug for North America, No service fixtures
- 230V, 50/60 Hz, with 5A plug for North America, Two service fixtures

All models require (not included):

Neutrodine® Unisorb, or HEPA Filters on HEPA-only models.

*Hoods with GFCI electrical duplex are rated at 20 amps. 8' Hoods have two GFCI electrical duplex receptacles, one mounted on each side, 20 amps each.

Single piece, tempered safety glass vertical-rising sashes with cable pulley, sash weight and powder-coated aluminum sash handle and tracks with Clean-Sweep™ airflow openings. Upper sash stop at 52" sash open height from floor. Upper sash chemical loading opening of 25.2". Lower sash opens up from floor to 55.2" for transporting carts, drums and apparatus
Removable front and side panels, and front and interior service access panels for access to plumbing and electrical wiring
eGuard software communication
Smart control command module with wifi, bluetooth and ethernet connectivity
Neutrodine® Unisorb Filters compatible with over 700 chemicals
Factory-installed command module, fan button and light button
Rear baffle
By-pass airflow design
Glacier white powder-coated steel exterior
Chemical-resistant, fiberglass-reinforced, composite panel liner
Pre-wired vapor-proof LED lights for up to 63 footcandles rated
for 50,000 hours
- 2 lights per 4' model
- 3 lights per 5' and 6' model
- 5 lights per 8' model
Factory-prepared for up to four electrical duplex receptacles and eight service fixtures
Roughing prefilter, 2 each per 4' model, 3 each per 5' and 6' models, and 5 each per 8' model
Built-in exhaust fan(s) to maintain 60 fpm face velocity with only an upper sash working opening of 13.2"
- 4' models: 2 each
- 5' and 6' models: 3 each
- 8' models: 5 each
Sound pressure of <60 dB(A) with sash at operating height and <48 dB(A) with sash closed
Sensor package for primary filter breakthrough of solvent fumes (acid/formaldehyde optional), face velocity, temperature and RH
Audible/visual alarms for breakthrough detection, temperature ≥40° C (104° F), fan failure and low face velocity, high RH. At ≥60° C (140° F), all fans stop
Power cord with plug to power the Smart control command module, fans and lights. Included junction box to route wiring for any additional electrical such as duplexes

Fixtured models may also feature:

Two pre-plumbed service fixtures with forged brass valves, lower right side with brass tubing for gas and lower left side with copper tubing for cold water. Components for converting either

or both fixtures to air and vacuum are provided. Inlet tubing is not provided

One pre-wired GFCI electrical duplex receptacle on lower right side and, on 8' models only, one additional pre-wired GFCI electrical duplex receptacle on the lower left side

Standards conformance & regulations: