800-521-0754

Request Information

Request Info

CLOSE

BINDER MKFT 115 Dynamic Climate Chambers for Rapid Temperature Changes | Humidity Control & Extended Low-Temp Range | 4.06 cu ft

Item#: 9020-0382

The BINDER MKFT series environmental simulation chamber for low temperature alternating climate profiles is the specialist for dynamic alternating climate change between -70 °C and 180 °C. Large performance reserves and rapid cooling make the MKFT environmental simulation chamber the high-end product for complex standards-based climate tests.

$54,829.00 $52,087.55

Supplier:
  • Temperature range: -70 to 180 °C
  • Temperature uniformity dependent on set value: 0.1 to 1.3 ± K
  • Temperature fluctuation dependent on set value: 0.1 to 0.1 ± K
  • Average heating-up rate according to IEC 60068-3-5: 5.5 K/min
  • Cooling down time from 180°C to -70°C: 120 min
  • Average cooling down time according to IEC 60068-3-5: 4.2 K/min
  • Temperature range with humidity: 10 to 90 °C
  • Humidity range: 95 % RH...10
  • Temperature fluctuation with humidity dependent on set value: 0.1 to 1 ± K
  • Humidity fluctuation with humidity dependent on set value: ≤2,5 ± % r.F.
  • Max. heat compensation at 25°C and 90% RH: 400 W
  • Interior volume: 115L
  • Net weight of the unit (empty): 330kg
  • Load per rack: 30kg
  • Permitted load: 60kg
  • Wall clearance back: 300mm
  • Wall clearance sidewise: 200mm
  • Internal Dimensions (wxhxd): 600mm x 480mm x 400mm
  • Temperature range: -70 °C to +180 °C
  • Humidity range: 10 % to 98 % RH
  • Integrated water-storage tank, 20 liters
  • 4 zero-voltage relay contacts
  • APT.line™ preheating chamber technology
  • Programmable condensation protection for test material
  • Intuitive touchscreen controller with time-segment and real-time programming
  • Internal data logger, measured values can be read out in open format via USB
  • Heated viewing window with LED interior lighting
  • Humidity regulation with capacitative humidity sensor and vapor humidification
  • BINDER Multi Management Software APT-COM™ Basic Edition
  • Troubleshooting system with visual and audible alarms
  • Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm
  • Access port with silicone plug: 50 mm, left
  • 4 castors, two with brakes
  • Computer interface: Ethernet
  • Adjustable ramp function
  • Integrated chart recorder
  • Real-time clock
  • Door heating
  • Alarm notification in the event of insufficient water in fresh water tank
  • 1 stainless steel rack
  • Complete safety connection kit for water supply and drainage, up to 1 m in height
  • Inner chamber made of stainless steel
  • CFC-free refrigerants R-452A and R-23
  • Cooling with cascade compressor cooling unit

Request a Proposal