NuAire In-VitroCell ES NU-8645 5.65 cu. ft. (160L) Water Jacketed CO2 Incubator
Item#: NU-8645The In-VitroCell NU-8645 CO2 Incubator uses a water jacket to control and maintain the temperature in the growth chamber. In addition, model NU-8645 features an oxygen suppression system to control O2 levels between 0.5 to 21 percent for mammalian tissue culture research. The NU-8645 uses a water pan and convection to generate up to 95% humidity levels. Monitor relative humidity in the chamber through an RH sensor and display the percentage on the incubator touchscreen controls. In-VitroCell NU-8645 provides uniform and stable growth conditions for cell culture research.
- Shipping Inches (mm): 31 (787) W x 49 (1245) H x 33 (838) D
- Access Port Location: Right Side
- Air Cleanliness (ISO 14644): ISO-Class-5
- Chamber Air Circulation Method: Air Pump
- Chamber Air Filter: 99.97% Efficiency @ ≥ 0.3 Micron Capsule Filter Located in Sensor Bay
- Chamber Heater(s) Location: Bottom of Chamber
- Chamber Jacket Technology: Water Jacket, 18 Gallon (68-Liter)
- CO2 Accuracy: ± 0.1%
- CO2 Control Logic: Fixed Algorithm/Manual, Environmental Adaptable
- CO2 Display Resolution: 0.1%
- CO2 Range: 0.1 to 20%, 5% Default Set Point
- CO2 Recovery: Up to 5% ± 0.2% / -0.5 in 5 minutes Average
- CO2 Sensor Type: Infrared (NDIR)
- Control System: NuTouch
- Data Output Features: RS-485, USB, 4-20mA
- Door and Perimeter Heater Control Logic: Base Duty Cycle set to chamber temperature Set-Point, Proportional 0-100% [manually adjustable
- Electrical Configuration: 115V50Hz, 230V5060Hz
- Exterior Depth: 27” (685mm)
- Exterior Door Seal: Magnetic Outer Door Gasket
- Exterior Height Inches (mm): 37.75 (958)
- Exterior Material: 16 Gauge Steel with Textured Polyurethane Finish
- Exterior Width Inches (mm): 25.625 (649)
- Footprint Depth inches (mm): 17.5 (445)
- Footprint Width inches (mm): 22 (557)
- In-line Gas Filters: 99.97% Efficiency @ ≥ 0.3 Micron Disk Filters for Gas & Air Supplies, Disk Filter for CO2 Sensor
- Segmented Doors: Optional Set of 4 Inner Doors
- Inner Doors: One Standard, Sectional optional
- Insulation: Insulation with R5.0 Rating
- Interior Depth Inches (mm): 20.625 (524)
- Interior Door Seal: Silicone Rubber Gasket
- Interior Height Inches (mm): 24 (611)
- Interior Material: Polished Type 304L 16 Gauge Stainless Steel
- Interior Volume Cubic Feet (Liters): 5.65 (160)
- Interior Width Inches (mm): 20.375 (518)
- Net Weight lbs (kg): 403 (183) includes full water jacket and shelves
- O2 Accuracy: ± 0.25%
- O2 Control Logic: Fixed algorithm/ manual environmental adaptable
- O2 Display Resolution: 0.1%
- O2 Measuring Range: 0 - 25%
- O2 Set Point Range: 0.5 -21.0% (ambient) (21.0% Default)
- O2 Recovery: 5.0 ± 0.5% twenty minutes on Average
- O2 Sensor Type: Zirconia Ceramic
- Power Cord Length Foot (Meter): 8 (2.5)
- Remote Alarm Terminals: Standard
- RH Accuracy: Not available
- RH Water Pan Capacity: 2L (Recommended Fill 1.5L)
- Sample Port Location: Inner Glass Door
- Shelf Capacity lbs (kg): 25 lbs per Shelf / 125 lbs per Incubator
- Shelf Depth Inches (mm): 18 3/4 (476)
- Shelf Material: Stainless Steel or Copper Alloy
- Shelf Width Inches (mm): 18 (457)
- Shelves: 4 Shelves Supplied, 16 Shelves Maximum Capacity
- Shipping Weight lbs (kg): 370 (168)
- Decontamination Cycle: Not Available
- Temperature Accuracy °C: ± 0.1%
- Temperature Control: Water Jacket
- Temperature Control Range: 5°C above ambient (to a 30°C max ambient) to 55°C
- Temperature Display Resolution : 0.1°C
- Temperature Recovery: 12°C/min. on Average
- Temperature Sensor Type: Precision Integrated Circuit
- Temperature Set-Point Range: 5°C to 55°C (37.0°C Default)
- Temperature Uniformity °C: ± 0.20°C @ 37°C
- Water Pan Depth Inches (mm): 1.5 (38)
- Water Pan Length Inches (mm): 12 (305)
- Water Pan Width Inches (mm): 10 (254)
- NuTouch Electronic Control System
- 100% Stainless Steel Coved Interior Chamber
- Dual Temperature Sensor Probes
- Infrared (IR) CO2 Sensor
- O2 Control System (NU-8631)
- Four (4) Stainless Steel Shelves
- Eight (8) Stainless Steel Shelf Guides
- Four (4) Wall Brackets
- Right Hinged Door Swing
- Remote Alarm Output Contacts
- 4 to 20 mA Analog Output
- RS-485 Communication
- USB Port
- CO2 Sample Port
- Adjustable Leg Levelers
- Access Port and Plug with Breather Holes
- One (1) Water Pan
- One (1) Electrical Cord
- Warranty: 3 Years Parts & Labor (5 Years IR Sensor Parts Only)
Electrical Requirements
- Startup Power: 475 watts
- Running Power: 250 watts
- Heat Rejected: 14 BTU / min.
Utility Connections
- Gas Connections: 0.25 in.
(6.3 mm) Tubing Connections - Gas Input Pressure: 20 PSIG
(1.4 BAR) Input Pressures
Maximum. Two-Stage Gas
Regulators Required.
-
Traceable® Excursion-Trac Datalogging Traceable Hygrometer
Item #: LABC3-6452CC$262.00$248.90 -
CO2 Resistant Orbital Shaker
Item #: OSC-26M$4,250.00$3,825.00 -
Traceable Digital Thermohygrometer with Clock
Item #: LABC3-5660$70.00$66.50 -
Traceable® Temperature/Humidity WIFI Data Logger Compatible w/ TraceableLIVE® Cloud Service-Remote Cable
Item #: LABC3-6521$358.00$340.10 -
Traceable® External Probe RH/Temperature Monitoring Hygrometer
Item #: LABC3-4154$90.00$85.50 -
Traceable® Ambient RH/Temperature Monitoring Hygrometer
Item #: LABC3-4155$74.00$70.30 -
Traceable® Temperature/Humidity WIFI Data Logger Compatible w/ TraceableLIVE® Cloud Service-Ambient Sensor
Item #: LABC3-6520$338.00$321.10 -
Traceable® Memory-Loc Datalogging Hygrometer
Item #: LABC3-6454CC$280.00$266.00
Request a Proposal
Related Products
-
Item #: MCO-230AICUVLG-PAItem #: MCO-50AICL-PAItem #: MCO-50M-PAItem #: MCO-170MP-PAItem #: MCO-170AICUVDL-PA
Submit a PO
Looking to submit a purchase order rather than buying online? Click on the Submit a PO button to learn more.
Sales & Support
Customer Service
Mon - Fri: 8AM to 5PM ET
101 Witmer Road, Suite 700
Horsham, PA 19044
Contact Sales
Need more information?
Would you like us to get in touch with you? Fill out the form below and we will contact you.