Memmert UF750plus Universal Forced Circulation Lab Oven, 230V | 26.4 Cu. ft.
Item#: UF750plus$16,161.00
- Working temperature range: at least 5 (UN/UNplus/UNm/UNmplus) or 10 (UF/UFplus/UFm/UFmplus) above ambient temperature to +300 °C
- Setting accuracy temperature: up to 99.9 °C: 0.1 / from 100 °C: 0.5
- Setting temperature range: +20 to +300 °C
- Temperature sensor: 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
- Fan: forced air circulation by 2 quiet air turbines, adjustable in 10 % steps for each segment individually
- Fresh air: Admixture of pre-heated fresh air by electronically adjustable air flap
- Vent: vent connection with restrictor flap
- Works calibration certificate: Calibration at +160°C
- Door: fully insulated stainless steel doors with 2-point locking (compression door lock)
- Internals: 2 stainless steel grid(s), electropolished
- Textured stainless steel casing
- Dimensions: W x H x D: 48.19" x 67.72" x 30.87" (d +2.21" door handle)
- Installation: on lockable castors
- Housing: rear zinc-plated steel
- Voltage Electrical load: 400 V and 3x 230 V w/o neutral, 50/60 Hz approx. 7000 W
- Set Up: The distance between the wall and the rear of the appliance must be at least 6". The clearance from the ceiling must not be less than 8" and the side clearance from walls or nearby appliances must not be less than 2".
- Altitude of installation: max. 2,000 m above sea level
- Ambient temperature: +5 °C to +40 °C
- Humidity rh: max. 80 %, non-condensing
- Overvoltage category: II
- Pollution degree: 2
- Transport information: The appliances must be transported upright
- Dimensions approx incl. carton (w x h x d): 52.36" x 75.20" x 41.34"
- Net weight: approx. 478.40 lbs.
- Gross weight carton: approx. 634.93 lbs.
- ControlCOCKPIT: TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays.
- Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
- Function HeatBALANCE: adapting the distribution of the heating performance of the upper and lower heating circuit from -50 % to +50 %
- Function SetpointWAIT: the process time does not start until the set temperature is reached
- Calibration: three freely selectable temperature values
- Adjustable Parameters: temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, summertime/wintertime
- Documentation: program stored in case of power failure
- Programming: AtmoCONTROL software on a USB stick for programming, managing and transferring programs via Ethernet interface or USB port
- Temperature control: mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
- Temperature control: overtemperature monitor TWW, protection class 3.1 or adjustable temperature limiter TWB, protection class 2, selectable on display
- AutoSAFETY: additionally integrated over- and under temperature monitor "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or under temperature, heating is switched off in case of overtemperature
- Auto diagnostic system: for fault analysis
- Alarm: visual and acoustic
Request a Proposal
Related Products
- Item #: UF1060208V $22,989.00
- Item #: UF450 $10,940.00
- Item #: UF750 $14,496.00
- Item #: UF30115V $2,543.00
- Item #: UF55115V $3,064.00
- Item #: UF75115V $3,621.00
- Item #: UF110115V $4,232.00
- Item #: UF160115V $5,572.00
