Labconco RXPert Double Filtered Balance Systems
Item#: RXPERT-DOUBLE-BALANCE-SYSTEMPatented RXPert Double Filtered Balance Systems are Class I biological safety cabinets that contain airborne particulates and powders, providing user protection during hazardous drug compounding or pharmaceutical manipulation. They are designed to meet the USP <800> requirements for non-sterile hazardous compounding.
These systems exhaust air through two levels of HEPA filtration, returning it safely to the lab. Both filters are 100% scannable, and can be replaced using a true bag-in/bag-out system. No ducting is required.
- Deep interior of 23.4" or 30.0" depending on the model.
- Ergonomic air foil with aerodynamic Clean-Sweep airflow openings.
- Upper dilution air supply.
- Upper containment sash foil.
- Zone-perforated, pivoting rear baffle.†
- Side-entry air foils.
- Two exhaust HEPA filters, 99.99% efficient on particles 0.3 micron in size.
- Each HEPA filter 100% independently leak-detection scannable without removing impellers or filters.
- True bag-in/bag-out filter disposal system (requires certified technician).
- Built-in blower with dynamically balanced, vibration-isolated motorized impeller and speed control. Blower has a 40% reserve so that the speed may be adjusted as needed by a certified technician as the filter loads.
- Guardian Airflow Monitor that continuously monitors airflow with a green LED that glows when airflow is within set point range and a red LED that glows and an audible alarm that sounds when airflow is outside set point range.
- Pressure gauge.
- Intrinsically safe, negative pressure design.
- Quiet operation
- Glacier white and gray, powder-coated aluminum frame and steel rear plenum and baffle. No unreliable plastic-to-plastic bonding is used.
- Pre-wired fluorescent lamp and switches for blower and light.
- 1/4" thick tempered safety glass front sash and sides.
- Ergonomic angled and hinged, pivoting sash with wiping seal. Sashes on taller 4', 5' and 6' models incorporate an external gas-assist lift.
- Models with 9.4" sash opening height have 16.5" locking height and 19.0" maximum loading height. Models with 12.0" sash opening height have 25.75" locking height and 28.25" maximum loading height.
- Two (1.5") utility ports for pass-through of electrical cords.
- 8' cord included.
- Regulation Conformity: USP <800> non-sterile compounding, SEFA 1, Modified ASHRAE 110, ANSI Z9.5, UL 61010-1, CAN/CSA C22.2 No. 1010.1
- USP <800> compliance
- Patented design
- Deep interior of 23.4" (59.4 cm) or 30.0" (76.2 cm) depending on model
- Ergonomic air foil with aerodynamic Clean-Sweep airflow openings
- Upper dilution air supply
- Upper containment sash foil
- Zone-perforated, pivoting rear baffle
- Side-entry air foils
- Exhaust HEPA filter, 99.99% efficient on particles 0.3 micron in size
- True bag-in/bag-out filter disposal system
Exclusive Features of RXPert Double Filtered Balance Systems
- True bag-in/bag-out HEPA filter disposal system allows for safe filter replacement.
- Optimal HEPA filter location permits leak-detection scan of entire surface.
- Upper dilution air supply sweeps clean air to the back of sash to keep contaminants away from the operator.
- Upper containment sash foil directs contaminants away from the user’s breathing zone.
- Patented Clean-Sweep™ air foil allows air to sweep the work surface to maximize containment.
- Patented rear baffle with zones of perforations promotes horizontal laminar airflow. The baffle pivots down for cleaning.
- Deep 23.4" or 30.0" (depending on model) interior easily accommodates large analytical balances.
Request a Proposal
Related Products
-
Item #: CVE-SINGLE-FLOWItem #: RXPERT-SINGLE-BALANCE-SYSTEMSItem #: XPERT-BALANCE-SYSTEMSItem #: XPERTTXEItem #: NANOTECH-FLOW
Submit a PO
Looking to submit a purchase order rather than buying online? Click on the Submit a PO button to learn more.
Sales & Support
Customer Service
Mon - Fri: 8AM to 5PM ET
101 Witmer Road, Suite 700
Horsham, PA 19044Contact Sales
Need more information?
Would you like us to get in touch with you? Fill out the form below and we will contact you.